How Much Does It Cost To Install Window Evaporative Cooling?
Window Evaporative Cooling Costs
Window evaporative cooling (E/C) units draw exterior air through evaporating-water filtration that results in a temperature drop of 15º to 25º F of the air being forced into the interior space. Its use is limited to dry and arid climate zones where evaporative phase-change conditions are good.
How much does it cost to install window evaporative cooling?
You will find that the cost of average window evaporative cooling varies by type of unit, its air flow (cubic feet per minute, CFM) and water pumping capacity, preparation and special needs, and the labor rate.
In the following tables the Labor Cost figure is what the able DIY person should expect to save by performing the corresponding tasks.
Window E/C: to cool 800 sq.ft.; include delivery, all material, equipment, and waste.
|Item||Unit Cost||Quantity||Line Cost|
|E/C unit: 3600 cubic feet per minute flow, 115 VAC, window mounted; with motor, pump, and hardware.||$564||each||1||$564|
|Upgrade: install new circuit; 30 feet of ROMEX surface mounted cable, #14/3; 15 amp breaker into existing space; two outlets with box and cover.||$0.85||per foot||32||$27|
|+ Labor Cost (install E/C unit)||$34||per hour||2||$68|
|+ Labor Cost (upgrade circuit)||$42||per hour||3||$126|
Additional considerations and costs
- E/C moves significant volumes of air from the exterior through the vented interior, resulting in air flow that can be bothersome to persons.
- In addition to cooling the air, intake air filtration is very high.
- E/C energy bills are about 1/3 or less of similar cooling capacity A/C cooling.
- Taxes and permit fees are not included.
- Energy efficient A/C will save money, and in some cases rebates may be available.
- For E/C units of greater than 12,000 BTU’s per hour (or 3.5 kilowatts) a multi-phase electrical circuit is generally required.
- During the initial inspection the contractor should inform the homeowner of any and all necessary modification or upgrade on electrical circuits or building structure.
- Labor cost will rise with a “hidden” circuit installation in a finished environment.
- Home improvement centers typically offer a DIY kit with this product.
- This project is suitable to an able and prepared DIY person with tools.
- The work may include heavy lifting and moving.
- Craftsman Estimator Costbook, complete series year 2015.
- Latest prices found on Home Depot and other vendor Web sites.
- Literature review of DIY Web sites.
Enter your zip code to get estimates
Cost by city
- New York, NY$1,015
- Bronx, NY$834
- Brooklyn, NY$695
- Philadelphia, PA$867
- Washington, DC$753
- Atlanta, GA$681
- Miami, FL$619
- Fort Lauderdale, FL$649
- Minneapolis, MN$761
- Chicago, IL$887
- Houston, TX$915
- San Antonio, TX$614
- Austin, TX$695
- Denver, CO$587
- Phoenix, AZ$620
- Las Vegas, NV$680
- Los Angeles, CA$766
- San Diego, CA$695
- San Jose, CA$840
- Seattle, WA$615
Local costs have been calculated by accounting for labor and material cost differences across different cities. To get accurate cost estimates, indicate yours: