Electric range circuits deliver power to the appliance. They are subject to compliance codes and professional practices designed to reduce fire risk.
You will find that the cost to install an average electric range circuit depends upon the power rating, circuit lengths, preparation and special requirements, and the labor rate.
In the following table the Labor Cost figure is what the able and prepared DIY persons should expect to save by performing the corresponding tasks.
Install a range circuit: with a single-plug outlet located 30 circuit-feet from the home load center; 240 VAC, 50 amp breaker installed in available home load center space. Include miscellaneous material and waste.
|Item||Unit Cost||Quantity||Line Cost|
|New circuit: install 30 feet of ROMEX surface mounted cable; 50 amp, 250 volt, #8/3 wire; one outlet receptacle box with cover.||$2.36||per foot||32||$76|
|Upgrade: additional cost to install THHN cable in exterior surface mounted 1/2" EMT metallic conduit with exterior rated outlet.||$3.36||per foot||32||$107|
|Material Cost||$5.72||per foot||32||$183|
|+ Labor Cost (electrical)||$42||per hour||3||$126|
|+ Labor Cost (upgrade)||$42||per hour||2||$84|
|Total Cost||$13.10||per foot||30||$393|
Prices range from $76 (30 foot circuit, exposed cable - DIY) to $393(30 foot circuit, outdoor conduit upgrade) and also vary depending on your zipcode:
Local costs have been calculated by accounting for labor and material cost differences across different cities. To get accurate cost estimates, indicate yours: