How Much Does It Cost To Install A Vinyl Liner Pool?


(12' x 24' in-ground vinyl liner pool)
Discover the costs in your city
Get your job done in 3 easy steps
1 finds the best top-rated contractors in your area
Contractors give you free customized estimates
Compare estimates & hire the contractor that will best fit your needs

Vinyl Liner Pool Costs

Outdoor Cost Guides      Swimming Pool Construction      Vinyl Liner Pool Costs

Vinyl liner is a common choice for in-ground pool material. It is mounted onsite to a steel frame and prepared surfaces. In-ground pools typically require excavation and removal work, followed by onsite construction activity.

The cost to install an average vinyl liner pool depends upon material and finish grade, finished surface area and material volume, preparation and special needs, and the labor rate.

In the following table the Labor Cost figure is what the able and prepared DIY persons should expect to save by performing the corresponding tasks.

In-ground pool: excavate and remove soil; build a 12' x 24' pool; include 20 mile transport range, material, equipment, and waste.

Item Unit Cost Quantity Line Cost
Vinyl liner on steel frame: depth 3' to 6' sloped; 612 sq.ft. finished surface, 288 sq.ft. footprint; with 6" x 6" tile border, pump, filter, piping, and 120V switch. $24 per sq.ft. 655 $15,389
Upgrade flatwork: additional cost to install 4" thick x 4' wide perimeter walkway and a 20' x 12' patio slab. $3.23 per sq.ft. 642 $2,074
Upgrade fence: additional cost to install vinyl picket security fence; 5' tall x walkway + patio perimeter; concrete post placement; self-closing gate. $15.71 per foot 143 $2,244
Material Cost $19,707 each 1 $19,707
+ Labor Cost (build pool) $34 per hour 92 $3,128
+ Labor Cost (upgrade flatwork) $34 per hour 24 $816
+ Labor Cost (upgrade fence) $34 per hour 14 $476
Total Cost $24,127 each 1 $24,127

Other considerations and costs

  • These prices are for service in the immediate area of the provider.
  • Taxes and permit fees are not included.
  • Typical additional residential site clearing and preparation tasks range in cost from $0.50 to $1.50 per sq.ft. depending on amount and size of material, and transport.
  • These pool examples do not include engineering attention to customization.

Check out our guide if you need aloan for your home improvement project.

DIY considerations

  • In-ground pools leave little DIY opportunity, other than upgrade accessories.


  • Craftsman Estimator Costbook, complete series year 2015.
  • Latest prices found on Home Depot and other vendor Web sites.
  • Literature review of DIY Web sites.
How much does it cost to install a vinyl liner pool in your city?
Enter your zip code to get estimates

Cost by city

(12' x 24' in-ground vinyl liner pool)
  • New York, NY$29,745
  • Bronx, NY$24,443
  • Brooklyn, NY$20,372
  • Philadelphia, PA$25,414
  • Washington, DC$22,053
  • Atlanta, GA$19,953
  • Miami, FL$18,147
  • Fort Lauderdale, FL$19,009
  • Minneapolis, MN$22,300
  • Chicago, IL$25,982
  • Houston, TX$26,799
  • San Antonio, TX$17,989
  • Austin, TX$20,369
  • Denver, CO$17,210
  • Phoenix, AZ$18,158
  • Las Vegas, NV$19,929
  • Los Angeles, CA$22,455
  • San Diego, CA$20,377
  • San Jose, CA$24,613
  • Seattle, WA$18,020

Local costs have been calculated by accounting for labor and material cost differences across different cities. To get accurate cost estimates, indicate yours: