How Much Does It Cost To Install Vinyl Plank Flooring?
Vinyl Plank Flooring Costs
Flooring material is that which covers the floor structure and creates the floor surface. Plank flooring is made up of boards and usually with tongue and groove edges.
You will find that the cost to install average vinyl plank flooring depends upon material and finish grade, surface area, preparation and special requirements, and the labor rate.
In the following table the Labor Cost figure is what the able and prepared DIY persons should expect to save by performing the corresponding tasks.
Replace flooring: of a 2,500 sq.ft. home with partitions and 500 linear feet of baseboard; remove and dispose existing flooring; include miscellaneous material and waste.
|Item||Unit Cost||Quantity||Line Cost|
|1. New flooring: install 2,500 sq.ft. of mid-grade 5/8" x 4-1/2" wide vinyl plank flooring and 500 linear feet of matching baseboard.||$2.49||per sq.ft.||2,625||$6,536|
|2. Upgrade: additional cost to install high range material||$2.14||per sq.ft.||2,625||$5,609|
|3. Removal:& remove 2,500 sq.ft. of carpet and underlayment, prepare for transport; strip to wood floor.||$0.01||per sq.ft.||2,500||$26|
|4. Disposal: transport and non-hazardous dump fees.||$45||per CY||10||$450|
|Fees and Material Cost||$5.05||per sq.ft.||2,500||$12,621|
|5. + Labor Cost (remove and dispose)||$32||per hour||16||$512|
|6. + Labor Cost (flooring)||$36||per hour||130||$4,680|
|Total Cost||$7.13||per sq.ft.||2,500||$17,813|
Other considerations and costs
- Preparation is limited to an undamaged floor in good condition to be replaced.
- These prices are for service in the immediate service area of the provider.
- Taxes and permit fees are not included.
Check out our guide if you need a loan for your home improvement project.
- This project is suitable for DIY with common set of tools and skills.
- Partial DIY is also possible by taking on the task of remove and dispose, leaving the installation to a professional.
- The work area must be free of all furniture and other objects.
- Craftsman Estimator Costbook, complete series year 2015.
- Latest prices found on Home Depot and other vendor Web sites.
- Literature review of DIY Web sites.
Enter your zip code to get estimates
Cost by city
- New York, NY$19,606
- Bronx, NY$16,111
- Brooklyn, NY$13,428
- Philadelphia, PA$16,751
- Washington, DC$14,536
- Atlanta, GA$13,151
- Miami, FL$11,961
- Fort Lauderdale, FL$12,529
- Minneapolis, MN$14,698
- Chicago, IL$17,125
- Houston, TX$17,664
- San Antonio, TX$11,857
- Austin, TX$13,426
- Denver, CO$11,344
- Phoenix, AZ$11,968
- Las Vegas, NV$13,136
- Los Angeles, CA$14,801
- San Diego, CA$13,431
- San Jose, CA$16,223
- Seattle, WA$11,877
Local costs have been calculated by accounting for labor and material cost differences across different cities. To get accurate cost estimates, indicate yours: