How Much Does It Cost To Install Slate Tile Floor?

$8,013

(500 sq.ft. slate tile floor)
Discover the costs in your city
Get your job done in 3 easy steps
1
Howmuch.net finds the best top-rated contractors in your area
2
Contractors give you free customized estimates
3
Compare estimates & hire the contractor that will best fit your needs

Slate Tile Floor Costs

Indoor Cost Guides      Flooring      Slate Tile Floor Costs

Tile flooring is installed in cement over concrete or other hard, prepared surfaces. Slate tile is a common premium choice of material for interior or exterior floors.

You will find that the cost to install an average slate tile floor depends upon material and finish grade, surface area and material volume, preparation and special needs, and the labor rate.

In the following table the Labor Cost figure is what the able and prepared DIY persons should expect to save by performing the corresponding tasks.

Tile flooring: 500 sq.ft. with 120 feet of perimeter base board; include costs for miscellaneous material, equipment, and waste.

Item Unit Cost Quantity Line Cost
Slate tile: transport all material and install 500 sq.ft. of top grade tiles 3/8" thick in 3/4" layer of mortar cement on top of prepared floor base. $8.74 per sq.ft. 525 $4,591
Cove base: 120' of 2-1/4" cemented matching cove-base. $4.52 per foot 120 $542
Upgrade: additional cost to include a 1-1/4" concrete compression and leveling layer between tiles and floor base. $1.11 per sq.ft. 525 $584
Material Cost $11.44 per sq.ft. 500 $5,717
+ Labor Cost (standard) $36 per hour 80 $2,880
+ Labor Cost (upgrade) $36 per hour 8 $288
Total Cost $17.77 per sq.ft. 500 $8,885

Other considerations and costs

  • These prices are for service in the immediate service area of the provider.
  • Taxes and permit fees are not included.

Check out our guide if you need a loan for your home improvement project.

DIY considerations

  • This project is not highly suitable for DIY.
  • Quite beyond a typical concrete pour, slate tile requires artisan skills.

References

  • Craftsman Estimator Costbook, complete series year 2015.
  • Latest prices found on Home Depot and other vendor Web sites.
  • Literature review of DIY Web sites.
How much does it cost to install slate tile floor in your city?
Enter your zip code to get estimates

Cost by city

(500 sq.ft. slate tile floor)
  • New York, NY$12,872
  • Bronx, NY$10,577
  • Brooklyn, NY$8,816
  • Philadelphia, PA$10,998
  • Washington, DC$9,543
  • Atlanta, GA$8,634
  • Miami, FL$7,853
  • Fort Lauderdale, FL$8,226
  • Minneapolis, MN$9,650
  • Chicago, IL$11,243
  • Houston, TX$11,597
  • San Antonio, TX$7,785
  • Austin, TX$8,814
  • Denver, CO$7,447
  • Phoenix, AZ$7,857
  • Las Vegas, NV$8,624
  • Los Angeles, CA$9,717
  • San Diego, CA$8,818
  • San Jose, CA$10,651
  • Seattle, WA$7,798

Local costs have been calculated by accounting for labor and material cost differences across different cities. To get accurate cost estimates, indicate yours: